Benzocoumarin Family Complete

Benzocoumarin Family Complete

Benzo[g]coumarins most suitable for applications as photonic materials
Read more



 Benzene-fused coumarins, benzocoumarins, constitute a promising family of photonic materials due to the extended nature of their π-electron system. Among four possible subfamilies of benzocoumarins



 http://www.chemistryviews.org/details/ezine/6508251/Benzocoumarin_Family_Complete.html

Bispirooxindole Derivatives

Bispirooxindole Derivatives

Regio- and stereoselective synthesis of bispirooxindole derivatives via a three-component 1,3-dipolar cycloaddition
Read more

An efficient synthesis of spirooxindole derivatives is highly valued due to the pronounced biological activities of this class of compounds.

http://www.chemistryviews.org/details/ezine/6522871/Bispirooxindole_Derivatives.html

7,7-dichlorobicyclo[4.1.0]heptane (7,7-dichloronorcarane

7,7-dichlorobicyclo[4.1.0]heptane (7,7-dichloronorcarane

+

NaOH,Pr3N

+

Synthesis of 7,7-dichlorobicyclo[4.1.0]heptane (7,7-dichloronorcarane) from cyclohexene

Reaction type:	addition to alkenes, elimination, cycloaddition
Substance classes:	alkene, carbene, chloroalkane
Techniques:	stirring with magnetic stir bar, adding dropwise with an addition funnel, distilling under reduced pressure, evaporating with rotary evaporator, shaking out, extracting, filtering, use of an ice cooling bath, heating with oil bath

http://kriemhild.uft.uni-bremen.de/nop/en/instructions/pdf/3005_en.pdf

Instruction (batch scale 100 mmol)
Equipment
100 mL three neck round bottom flask, reflux condenser, addition funnel with pressure
balance, heatable magnetic stirrer, magnetic stir bar, thermometer for inside of the flask,
separating funnel, destillation apparatus, rotary evaporator, oil bath, ice bath, vacuum pump
Substances
cyclohexene (bp 83 °C) 8.21 g (10.1 mL, 100 mmol)
chloroform (bp 61 °C) 48.0 g (32.7 mL, 400 mmol)
sodium hydroxide 16.0 g (400 mmol)
tri-n-propylamine (bp 156 °C) 0.14 g (0.19 mL, 1.0 mmol)
water 16 mL
ethanol (bp 78 °C) 1 mL
n-pentane (bp 36 °C) 120 mL
sodium sulfate for drying about 5 g
sodium chloride about 18 g
Reaction
Into a 100 mL three neck round bottom flask equipped with a reflux condenser addition
funnel, thermometer for measuring the inside temperature and magnetic stir bar, 8.21 g
(10.1 mL, 100 mmol) cyclohexene 0.14 g (0.19 mL, 1.0 mmol) tri-n-propylamine, 48.0 g
(32.7 mL, 400 mmol) chloroform and 1 mL ethanol is added. The mixture is cooled to 0 °C
with an ice bath, then under stirring and further cooling in the ice bath a solution of 16.0 g
(400 mmol) sodium hydroxide in 16 mL water is added through an addition funnel. The
mixture should be stirred vigourously during the next 20 minutes at 0 °C. After this time the
mixture is further stirred during 1 hour at room temperature and 3 hours at 50 °C.
Work up
Chloroform is evaporated with a rotary evaporator, then the residue is transferred with about
50 mL water and 30 mL n-pentane into a separating funnel. The organic phase is separated,
the aqueous phase is further extracted three times with 30 mL pentane. If an emulsion is
formed the aqueous phase is saturated with NaCl. The combined organic phases are dried over
sodium sulfate. The solution is filtered from sodium sulfate and the solvent is evaporated with
a rotary evaporator, yielding a nearly colourless liquid as crude product. The crude yield is
14.6 g. The crude product is distilled under reduced pressure.
Yield: 13.6 g (82.3 mmol, 82%), colourless liquid; bp 77 °C (11 hPa)

Operating scheme

Operating scheme

Equipment

Batch scale:

0.01 mol

0.1 mol

1 mol

Cyclohexene

	two-necked flask 10 mL			reflux condenser
	heatable magnetic stirrer with magnetic stir bar			thermometer
	graduated pipette			separating funnel
	microdistillation apparatus			rotary evaporator
	oil bath			ice bath
	vacuum pump

................ 




GC: pure productcolumnSE-54, L= 25 m, ID 0.32 mm, DF 0.25 µm (Macherey & Nagel)inletGerstel KAS, injector: 250°C, split injection 1:20, 0.15 µLcarrier gasN2, pre-column pressure 62 kPa, 1.04 mL/minoven80 °C (1 min), 10 °C/min --> 250 °C (30 min)detectorFID, 275 °Cintegrationpercent concentration calculated from relative peak area

1H-NMR: 7,7-Dichlorobicyclo[4.1.0]heptane
500 MHz, CDCl3
delta [ppm]	mult.	atoms	assignment
1.12-1.36	m	4 H	C4-H, C5-H
1.61-1.71	m	4 H	C3-H, C6-H
1.88-1.98	m	2 H	C1-H, C2-H
7.26	s	1 H	CHCl3

3C-NMR: 7,7-Dichlorobicyclo[4.1.0]heptane
125 MHz, CDCl3
delta [ppm]	assignment
18.9	C4, C5
20.2	C3, C6
25.8	C2, C1
67.4	C7
76.5-77.5	CDCl3

IR: 7,7-Dichlorobicyclo[4.1.0]heptane
[Film, T%, cm-1]
[cm-1]	assignment
2944, 2855	aliph. C-H valence
796	C-Cl valence

ORGANIC SPECTROSCOPY

Read all about Organic Spectroscopy on ORGANIC SPECTROSCOPY INTERNATIONAL 

ENDO EXO STORY.......cis-norborene-5,6-endo-dicarboxylic anhydride

ENDO EXO STORY.......cis-norborene-5,6-endo-dicarboxylic anhydride

You will react cyclopentadiene with maleic anhydride to form the Diels-Alder product below. This Diels-Alder reaction produces almost solely the endo isomer upon reaction at ambient temperature.




The preference for endo–stereochemistry is “observed” in most Diels-Alder reactions. The fact that the more hindered endo product is formed puzzled scientists until Woodward, Hoffmann, and Fukui used molecular orbital theory to explain that overlap of the p orbitals on the substituents on the dienophile with p orbitals on the diene is favorable, helping to bring the two molecules together.

Hoffmann and Fukui shared the 1981 Nobel Prize in chemistry for their molecular orbital explanation of this and other organic reactions. In the illustration below, notice the favorable overlap (matching light or dark lobes) of the diene and the substituent on the dienophile in the formation of the endo product:






Oftentimes, even though the endo product is formed initially, an exo isomer will be isolated from a Diels-Alder reaction. This occurs because the exo isomer, having less steric strain than the Endo , is more stable, and because the Diels-Alder reaction is often reversible under the reaction conditions. In a reversible reaction, the product is formed, reverts to starting material, and forms again many times before being isolated.

The more stable the product, the less likely it will be to revert to the starting material. The isolation of an exo product from a Diels-Alder reaction is an example of an important concept: thermodynamic vs kinetic control of product composition. The first formed product in a reaction is called the kinetic product. If the reaction is not reversible under the conditions used, the kinetic product will be isolated. However, if the first formed product is not the most stable product and the reaction is reversible under the conditions used, then the most stable product, called the thermodynamic product, will often be isolated.



The NMR spectrum of cis-5-norbornene-2,3-endo-dicarboxylic anhydride is given below:





Cis-Norbornene-5,6-endo-dicarboxylic anhydride 
Cyclopentadiene was previously prepared through the cracking of dicyclopentadiene and kept under cold conditions.  In a 25 mL Erlenmeyer flask, maleic anhydride (1.02 g, 10.4 mmol) and ethyl acetate (4.0 mL) were combined, swirled, and slightly heated until completely dissolved.  To the mixture, ligroin (4 mL) was added and mixed thoroughly until dissolved.  Finally, cyclopentadiene (1 mL, 11.9 mmol) was added to the mixture and mixed extensively.  The reaction was cooled to room temperature and placed into an ice bath until crystallized.  The crystals were isolated through filtration in a Hirsch funnel.  The product had the following properties: 0.47 g (27.6% yield) mp: 163-164 °C (lit: 164 °C).  ¹H NMR (CDCl₃, 300 MHz) δ: 6.30 (dd, J=1.8 Hz, 2H), 3.57 (dd, J=7.0 Hz, 2H), 3.45 (m, 2H), 1.78 (dt, J=9.0,1.8 Hz, 1H), 1.59 (m, 1H) ppm.  ¹³C NMR (CDCl₃, 75Hz) δ: 171.3, 135.5, 52.7, 47.1, 46.1 ppm.  IR 2982 (m), 1840 (s), 1767 (s), 1089 (m) cm^-1.

Reaction Mechanism The scheme below depicts the concerted mechanism of the Diels-Alder reaction of cyclopentadiene and maleic anhydride to formcis-Norbornene-5,6-endo-dicarboxylic anhydride.

Results and Discussion 
When combining the reagents, a cloudy mixture was produced and problems arose in the attempt to completely dissolve the mixture.  After heating for about 10 minutes and magnetically stirring, tiny solids still remained. The undissolved solids were removed form the hot solution by filtration and once they cooled, white crystals began to form. Regarding the specific reaction between cyclopentadiene and maleic anhydride, the endo isomer, the kinetic product, was formed because the experiment was directed under mild conditions.   The exo isomer is the thermodynamic product because it is more stable.3

A total of 0.47 g of the product was collected; a yield of 27.6%. The melting point was in the range of 163-164 °C which indicates the absence of impurities because the known melting point of the product is 164 °C.

The ¹H NMR spectrum of the product revealed a peak in the alkene range at 6.30 ppm, H-2 and H-3 (Figure 1).  In addition, it exhibited two peaks at 3.57 and 3.45 ppm because of the proximity of H-1, H-4, H-5, and H-6 to an electronegative atom, oxygen.  Finally, two peaks at 1.78 and 1.59 ppm corresponded to the sp³ hydrogens, Hb and Ha, respectively.  Impurities that appeared included ethyl acetate at 4.03, 2.03, and 1.31 ppm as well as acetone at 2.16 ppm.

Regarding the ¹³C NMR, a peak appeared at 171.3 ppm, accounting for the presence of two carbonyl functional groups, represented by C-7 and C-8 in Figure 1.  The alkene carbons, C-2 and C-3, exhibited a peak at 135.5 ppm, while the sp³ carbons close to oxygen, C-5 and C-6, displayed a peak at 52.7 ppm.  Finally, peaks at 46.1 and 47.1 ppm accounted for the sp³ carbons, C-1 and C-4, and C-9.  Impurities of ethyl acetate appeared at 46.6, 25.8, and 21.0 ppm accompanied with acetone at 30.9 ppm.

The IR spectrum revealed a peak at 2982 cm^-1 representing the C-H stretches.  A peak at 1840 cm^-1 accounted for the carbonyl functional group, while a peak at 1767 cm^-1 accounted for the alkene bond.  A peak at 1089 cm^-1 represented the carbon-oxygen functional group.

In order to distinguish between the two possible isomers, properties such as melting point and spectroscopy data were analyzed.  The exo product possessed a melting point in the range of 140-145 °C which is significantly lower than the endo product.  The observed melting point in this experiment supported the production of the endo isomer. 
The ¹H NMR spectum exhibited a doublet of doublets at 3.57 ppm for the endo isomer.  The exo isomer would possess a triplet around 3.50 ppm due to the difference in dihedral angle between the hydrogen molecules of H-1 and H-4, and H-5 and H-6 (Figure 1).  A peak at 3.00 ppm would appear in the exo isomer spectra as opposed to a peak at 3.60 ppm as shown in the observed endo product.³ This is because of the interaction and coupling with the H-5 and H-6, as displayed in Figure 1.

Conclusion 
Through the Diels-Alder reaction, 27.6% yield of cis-Norbornene-5,6-endo-dicarboxylic anhydride was produced. The distinction of the presence of the endo isomer was proven by analyzing physical properties of both possible isomers.

Martin, J.; Hill, R.; Chem Rev, 1961, 61, 537-562.

2 Pavia, L; Lampman, G; Kriz, G; Engel, R. A Small Scale Approach to Organic Laboratory   Techniques, 2011, 400-409.

3 Myers, K.; Rosark, J. Diels-Alder Synthesis, 2004, 259-265.
link 
http://orgspectroscopyint.blogspot.in/2014/08/cis-norborene-56-endo-dicarboxylic.html

ORGANIC SPECTROSCOPY INTERNATIONAL

Read all about Organic Spectroscopy onORGANIC SPECTROSCOPY INTERNATIONAL  

THANKS AND REGARD’S
DR ANTHONY MELVIN CRASTO Ph.D

amcrasto@gmail.com

MOBILE-+91 9323115463

GLENMARK SCIENTIST ,  INDIA
web link

ABOUTME, BRAND ANTHONYCRASTO, COLLECTION OF SITE LINKS, BRAVESITES,GRAVATAR, JIMDO, SKILLPAGES, MIXXT, APNACIRCLE, ZIC ZAC, ZING ME, SCOOP IT, scribd, Stumbleupon, Delicious, pinnterest, tumblr, Newsvine, SLIDESHARE, ACADEMIA.EDU, GOOGLE PLUS, FACEBOOK, TWITTER, ISSUU, DIIGO, YOLASITE, Authorstream, Symbaloo, ISSUU, BLOGLOVIN,FRIENDFEED, NEWSVINE

Congratulations! Your presentation titled “Anthony Cra sto Glenmark scientist, helping millions with websites” has just crossed MILLION views.

アンソニー     安东尼   Энтони    안토니     أنتوني

blogs are 

New Drug Approvals, ALL ABOUT DRUGS, WORLD DRUG TRACKER

MEDICINAL CHEM INTERNATIONAL, DRUG SYN INTERNATIONAL

SCALEUP OF DRUGS, ALL FOR DRUGS ON WEB,

• Green Chemistry International,  
• Eurekamoments in Organic Chemistry ,   
• WIX CHEMISTRY BLOG , 
• Drug regulatory affairs international 
• ORGANIC CHEMISTRY SELECT
• ORGANIC SPECTROSCOPY INTERNATIONAL 
• ORGANIC SYNTHESIS INTERNATIONAL 
• ORGANIC CHEMISTRY INTERNATIONAL
• DR ANTHONY MELVIN CRASTO  OLD BLOG

 MY CHINA, VIETNAM  AND JAPAN BLOGS

http://amcrasto.blog.fc2.com/

http://blog.sina.com.cn/u/5030268874

http://ameblo.jp/medchem-amcrasto/

http://me.zing.vn/u/amcrasto

ICELAND, RUSSIA, ARAB

BOBRDOBR, BLAND ICELAND, 100zakladok, adfty

GROUPS

you can post articles and will be administered by me on the google group which is very popular across the world

OPD GROUPSPACES, SCOOP OCI, organic-process-development GOOGLE, TVINX, MENDELEY WDT,SCIPEOPLE OPD, EPERNICUS OPD, SYNTHETIC ORGANIC CHEMISTRYLinkedIn group, DIIGO OPD,LINKEDIN OPD, WDT LINKEDIN, WDTI ZING

WORLD DRUG TRACKER FACEBOOK

amcrasto@gmail.com

ORGANIC SPECTROSCOPY

Read all about Organic Spectroscopy on ORGANIC SPECTROSCOPY INTERNATIONAL